On a non-pipelined sequential processor, a program segment, which is the part of the interrupt service routine, is given to transfer $500$ bytes from an I/O device to memory.
Initialize the address register
Initialize the count to 500
LOOP: Load a byte from device
Store in memory at address given by address register
Increment the address register
Decrement the count
If count !=0 go to LOOP
Assume that each statement in this program is equivalent to a machine instruction which takes one clock cycle to execute if it is a non-load/store instruction. The load-store instructions take two clock cycles to execute.
The designer of the system also has an alternate approach of using the DMA controller to implement the same transfer. The DMA controller requires $20$ clock cycles for initialization and other overheads. Each DMA transfer cycle takes two clock cycles to transfer one byte of data from the device to the memory.
What is the approximate speed up when the DMA controller based design is used in a place of the interrupt driven program based input-output?
- $3.4$
- $4.4$
- $5.1$
- $6.7$